| Customization: | Available |
|---|---|
| Type: | Special Steel Bar |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| woven bags or as your requirement |
| 15 days after received L/C or the deposit of T/T |
Product name |
ASTM A276 stainless steel bar,stainless steel hot rolled bar,stainless steel cold rolled bar,SS steel rod,round bar |
| Material | 201,202,301,304,309S,310S,316,316L,316Ti,317,317L,321,410,420,430,etc. |
| Standard | ASTM A276,GB/T1220-2007,etc. |
| Dia. | Bright bar:Φ2mm-30mm |
| Black bar:Φ6mm-300mm | |
| Or dia. as your requirements. | |
| Length | 12m,11.8m,6m,5.8m,4m or as your requirement |
| Surface Finish | No.1,2D,2B,BA,No.3,No.4,HL,8K,etc. |
| Application | Petroleum,chemical engineering, medicine, foodstuff, electronic power industry, shipbuilding, provision, heat changer, environment protection,ocean engineering, and so on. |
| Package | Wraps with Kraft paper,steel strip bundled ,wooden matting, or as your requirements, seaworthy bundle wooden case. |
| Delivery time | 15-30 days after receiving the deposit. |
Technique |
Forged/Hot Rolled/Cold Drawn/Peeled |
Category |
1.Round bar 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. 2)Acid round bar: (5-400)x6000mm or according to your requirement. 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. 4)Polishing round bar: (5-400)x6000mm or according to your requests. |
2. Square bar 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests. |
|
3. Flat bar 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
|
4. Hexagon bar 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. |
|
5. Channel bar 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. 2)Acid channel bar: (5-100)x6000mm or according to your requests. 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests. |
|
6. Threaded bar 1)Hot rolled threaded bar: (5-100)x6000mm or according to your requests. 2)Acid threaded bar: (5-100)x6000mm or according to your requests. 3)Cold drawn threaded bar: (1-20)x6000mm or according to your requests. |
|
7. Angle bar 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
|
Diameter± |
H9 tolerance can reach the industry standard |
Package |
Standard seaworthy packing(plastic&wooden) or according to the customer's requests |
Remarks |
OEM/Sample/Mixed item/Factory visit are welcome |
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Ti |
|
SX Analysis |
0.08 max |
2.0 max |
0.045 max |
0.030 max |
1.0 max |
17.0 - 19.0 |
9.0 - 12.0 |
5X%C min 0.5 max |
Typical |
0.06 |
1.2 |
0.020 |
0.020 |
0.5 |
17.5 |
9.4 |
0.48 |
Tensile Strength, MPa |
580 |
515 |
Proof Stress (0.2 % offset), MPa |
280 |
205 |
Elongation (Percent in Lo = 5.65 So) |
60 |
40 |
Hardness (Brinell) |
163 |
- |
Endurance (fatigue) limit, MPa |
260 |
){kind=link}